Cisco Aironet Dual-band Dipole Antenna  RP-TNC, AIR-ANT2524DW-R=>>  Specificatiile producatorului  < <  Cisco Aironet Dual-band Dipole Antenna (AIR-ANT2524DB-R, AIR-ANT2524DG-R, and AIR-ANT2524DW-R)This document describes and provides specifications for the Cisco Aironet high-performance, dual-band dipole antenna. The antenna operates in both the 2.4-GHz and 5-GHz frequency bands and is designed for use with Cisco Aironet 2.4-GHz and 5-GHz radio products that have dual-band reverse-polarity TNC (RP-TNC) antenna ports. The antenna has a nominal gain of 2 dBi in the 2.4-GHz frequency band and 4 dBi in the 5-GHz frequency band. The three antennas covered in this document are electrically the same. They differ physically by the color of the radome, which is specified by the product part number shown in Table 1.  Table 1 Antenna Radome ColorsAntenna Part NumbersRadome ColorAIR-ANT2524DB-RBlackAIR-ANT2524DG-R GrayAIR-ANT2524DW-RWhite The following information is provided in this document. Technical SpecificationsSystem RequirementsFeaturesInstalling the AntennaObtaining Documentation and Submitting a Service RequestTechnical SpecificationsTable 2 AIR-ANT2524Dx-R Series Dual-band Dipole SpecificationsParameterSpecification An tenna typeDual-band dipole  Operating frequency range2400 to 2500 MHz5150 to 5850 MHzNominal input impedance50 OhmsVSWRLess than 2:1Peak Gain @ 2.4. GHz2 dBiPeak Gain @ 5 GHz4 dBiElevation plane 3dB beamwidth @2.4 GHz63 degreesElevation plane 3dB beamwidth @ 5 GHz39 degreesConnector typeRP-TNC plugAntenna length6.63 in. (168.5 mm)Antenna width0.83 in (21 mm)Radome length4.88 in. (124 mm)Weight1.3 ozOperating temperature-20°C to 60°C(-4° to 140°F)Storage temperature-40°C to 85°C(-40°F to 185°F)EnvironmentIndoor, officeAzimuth and Elevation Plane Patterns for 2.4 GHz  Azimuth and Elevation Plane Patterns for 5 GHz   System RequirementsThis antenna is designed for use with Cisco Aironet access points that support simultaneous operation in the 2.4 GHz band and the 5 GHz band and that have dual-band antenna ports, labeled as such in orange text. FeaturesThe antenna has an articulated base that can be rotated 360 degrees at the connection point and from 0 to 90 degrees at its joint. Installing the AntennaCaution The AIR-ANT2524Dx-R series of antennas are dual-band antennas, meaning that they operate in both the 2.4 GHz and 5 GHz frequency bands. The AIR-ANT2524Dx-R series antennas have an orange ID band on them to indicate their dual-band functionality. Connect these antennas only to dual-band antenna ports, which are identified with orange text on Cisco Aironet access points. Using these antennas on Cisco Aironet access points that employ single-band antennas might result in lower performance. Follow these steps to install the antenna. Step 1 Verify that the connector to which you are connecting the antenna is a dual-band antenna port, identified by orange text on the access point. Step 2 Align the antenna connector with the RP-TNC connector on the access point. Step 3 Engage the antenna connector threads with the RP-TNC connector on the access point. Step 4 Tighten the antenna by hand. Do not use a wrench or any other tool to tighten the antenna. Step 5 Adjust the antenna's articulating joint to the desired position 


Denumiri similare la Antena Wlan Cisco AIR-ANT2524DW-R: AIR ANT 2524 DW R, AIRANT2524DWR, AIR ANT2524DW R, AIR ANT2524DW-R, AIR-ANT2524DW R

Galerie